针对给定太阳日辐射曲线,研究集成蓄热单元的太阳光热系统的整体能量的动态转化特性及关键参数影响规律。结果表明：填料床总储热量与传热流体进口流速呈非线性变化,当传热流体进口流速 uf =0.006 m/s时,填料床总储热量最大;在给定填料总容量和uf =0.006 m/s的条件下,填料床高径比为5的填料床具有更高的储热能力;在该计算条件下,uf =0.006 m/s、填料床高径比为5及填料量相对值为1时,太阳光热能实现最大程度上的转化和储存。
Abstract
A solar thermal energy collection unit and a packed bed thermal energy storage unit is integrated, and the effect of dynamic matching characteristics of solar thermal input unit and the heat storage unit on its overall energy utilization performance is studied. Based on the given dailysolar radiation curve, influences of the key parameters, including the HTF flow rate, the height-to-diameter ratio and the relative storage capacity on the overall thermal performance of the integrated solar energy system also are studied. The results show that the relationship between the total heat energy storage of packed bed and the inlet velocity of heat transfer fluid shows a nonlinear change. The maximal thermal energy is stored in the packed bed when the HTF mass flow rate uf is 0.006 m/s. Under the condition of uf at 0.006 m/s and at the fixed PCM package, the optimal packed bed height-to-diameter ratio of 5 is achieved. With uf of 0.006 m/s, the height-to-diameter ratio of 5, and the relative value of the filler amount is of 1, the maximal solar energy conversion efficiency is obtained in this research.
关键词
填料床 /
太阳能 /
相变材料 /
储能
Key words
packed bed /
solar energy /
phase change materials /
energy storage
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] 高鑫磊, 由世俊, 张欢, 等. 槽式太阳能新型腔式吸热器模拟和应用研究[J]. 太阳能学报, 2019, 40(10): 2899-2904.
GAO X L, YOU S J, ZHANG H, et al.Simulation and application research of a new trough solar cavity heat sink[J]. Acta energiae solaris sinica, 2019, 40(10): 2899-2904.
[2] 闫云飞, 张智恩, 张力, 等. 太阳能利用技术及其应用[J]. 太阳能学报, 2012, 33(S1): 47-56.
YAN Y F, ZHANG Z E, ZHANG L, et al.Solar energy utilization technology and its application[J]. Acta energiae solaris sinica, 2012, 33(S1): 47-56.
[3] 高龙, 格根塔娜, 孙佰仲, 等. 填充床潜热储热数值模型研究进展[J]. 发电技术, 2019, 40(4): 339-346.
GAO L, GE G T N, SUN B Z, et al. Research progress in numerical models of packed bed latent heat storage[J]. Power generation technology, 2019, 40(4): 339-346.
[4] KARTHIKEYAN S, SOLOMON G R, KUMARESAN V, et al.Parametric studies on packed bed storage unit filled with PCM encapsulated spherical containers for low temperature solar air heating applications[J]. Energy conversion and management, 2014(78): 74-80.
[5] PENG H, DONG H, LING X.Thermal investigation of PCM-based high temperature thermal energy storage in packed bed[J]. Energy conversion and management, 2014, 81: 420-427.
[6] PANESI R.Experimental study using different heat transfer fluid of a packed bed thermal energy storage system during charging process[J]. Australian journal of mechanical engineering, 2018, 16(3): 1-5.
[7] RUDRODIP M A, SANDIP K, SAHA B.Computational study of performance of cascaded multi-layered packed-bed thermal energy storage for high temperature applications[J]. Journal of energy storage, 2020, 32: 101931-101939.
[8] NALLUSAMY N, SAMPATH S, VELRAJ R.Study on performance of a packed bed latent heat thermal energy storage unit integrated with solar water heating system[J]. Journal of Zhejiang University-Science A, 2006(8): 1422-1430.
[9] 刘俊峰. 太阳能中温相变储热器热损失的研究[D]. 合肥: 合肥工业大学, 2015.
LIU J F.Research on the heat loss of solar energy medium temperature phase change heat storage[D]. Hefei: Hefei University of Technology, 2015.
[10] 陈学, 李洋, 夏新林, 等. 高温圆管内多孔介质耦合换热的辐射作用[J]. 航空动力学报, 2016, 31(10): 2437-2442.
CHEN X, LI Y, XIA X L, et al.Radiation effect of coupled heat transfer of porous media in high temperature circular tube[J]. Journal of aeronautical dynamics, 2016,31(10): 2437-2442.
[11] 魏凤. 通过太阳真空管光学性能推导光热转化效率的研究[J]. 现代科学仪器, 2010(2): 30-33.
WEI F.Research on deriving light-to-heat conversion efficiency based on the optical performance of solar vacuum tube[J]. Modern scientific instruments, 2010(2):30-33.
[12] 张建国. 太阳能布雷顿热机发电系统仿真研究[D]. 哈尔滨: 哈尔滨工程大学, 2012.
ZHANG J G.Simulation research of solar dynamic brayton cycle system[D]. Harbin: Harbin Engineering University, 2012.
[13] ERGUN S.Fluid flow through packed columns[J]. Industrial and engineering chemistry research, 1952, 48(2): 89-94.
[14] NANCY B.Packed bed latent heat storage[EB/OL]. https://cn.comsol.com/model/packed-bed-latent-heat-storage-76181.
[15] 耿直, 刘浩晨, 莫子渊, 等. 基于EBSILON的中低温槽式光热发电系统运行仿真与性能分析[J]. 热力发电,2020, 49(6): 61-68.
GENG Z, LIU H C,MO Z Y, et al.Operation simulation and performance analysis of medium and low temperature trough solar thermal power generation system based on EBSILON[J]. Thermal power generation, 2020, 49(6): 61-68.
[16] PENG H, DONG H H, LING X.Thermal investigation of PCM-based high temperature thermal energy storage in packed bed[J]. Energy conversion and management,2014, 81: 420-427.
[17] 闫珂, 程乐鸣, 张维国, 等. 多孔介质蓄热系统动态蓄热特性试验与表征[J]. 能源工程, 2020(1): 45-51.
YAN K, CHENG L M, ZHANG W G, et al.Experiment and characterization of dynamic heat storage characteristics of porous media heat storage system[J]. Energy engineering, 2020(1): 45-51.
基金
南京航空航天大学研究生创新基地（实验室）开放基金立项资助项目（kfjj20200217）
PDF(2269 KB)
