在太阳能储能装置中,保持相变储能单元组配灵活性不受影响的同时,为了增强板式相变单元的蓄热性能,对普通的矩形板式单元进行结构优化,设计了新型的梯形体单元,并利用理论分析得到了最优梯形体结构的理论解。将理论分析结果进行实验验证,研究表明：设计出的新型梯形体板式单元不仅能充分利用相变材料本身的熔化特性提升储能装置的蓄热性能,还能提高空间利用率。在研究范围内,换热流体流速的增大和温度的增加可有效地提高单元的换热效率,其中,流速为0.12 m/s时最优梯形体单元比之矩形单元的蓄热性能提升最明显。
Abstract
While avoiding any compromise on the flexibility of assembly for phase change energy storage unit in solar energy storage devices, the structure of ordinary rectangular plate unit was optimized to enhance the heat storage performance of plate phase change unit, a new type of trapezoidal unit was designed, and the theoretical solution to optimal trapezoid structure was obtained through theoretical analysis. Besides, the results of theoretical analysis were verified by means of experimentation, suggesting that the designed new trapezoidal plate unit is not only capable of enhancing the heat storage performance of energy storage device by taking advantage of the melting characteristics of the phase change material, but also effective in improving the rate of space utilization. As far as this study is concerned, the increase in the flow rate of the heat exchange fluid and temperature rise are effective in improving the efficiency of heat exchange for the unit. To be specific, when the flow rate reached 0.12 m/s, the optimal trapezoidal unit showed a more significant sign of improvement in heat storage performance than the rectangular unit.
关键词
太阳能 /
优化设计 /
相变蓄热 /
熔化 /
热性能
Key words
solar energy /
inclination angle /
phase change thermal storage /
melting /
thermal property
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] 刘洋, 段建国, 贺秀芬, 等. 低温相变储能单元强化传热特性实验[J]. 太阳能学报, 2020, 41(6): 335-340.
LIU Y, DUAN J G, HE X F, et al.Experiment on enhanced heat transfer characteristics of low temperature phase change energy storage unit[J]. Acta energiae solaris sinica, 2020, 41(6): 335-340.
[2] PERE M, CRISTIAN S, ALBERT C, et al.The use of phase change materials in domestic heat pump and air-conditioning systems for short term storage: a review[J]. Renewable and sustainable energy reviews, 2014, 39(1): 1-13.
[3] TAN F L.Constrained and unconstrained melting inside a sphere[J]. International communications in heat and mass transfer, 2008, 35(4): 466-475.
[4] 洪鼎华, 刘士琦, 陶汉中. 矩形腔相变蓄热装置蓄热性能的数值模拟及优化[J]. 可再生能源, 2018, 36(5): 690-695.
HONG D H, LIU S Q, TAO H Z.Numerical simulation and optimization of heat storage performance of rectangular cavity phase change heat storage device[J]. Renewable energy resources, 2018, 36(5): 690-695.
[5] HO C J, VISKANTA R.Heat transfer during melting from an isothermal vertical wall[J]. Journal of heat transfer, 1984, 106(1): 12-19.
[6] KAMKARI B, SHOKOUHMAND H, BRUNO F.Experimental investigation of the effect of inclination angle on convection-driven melting of phase change material in a rectangular enclosure[J]. International journal of heat and mass transfer, 2014, 72: 186-200.
[7] YE W B.Melting process in a rectangular thermal storage cavity heated from vertical walls[J]. Journal of thermal analysis and calorimetry, 2016, 123(1): 873-880.
[8] 高维, 赵军, 赵栋. 直接接触式/间接接触式加肋蓄热器性能比较研究[J]. 太阳能学报, 2016, 37(5): 1242-1247.
GAO W, ZHAO J, ZHAO D.Comparison of performance of direct contact/indirect contact finned heat accumulators[J]. Acta energiae solaris sinica, 2016, 37(5): 1242-1247.
[9] 卢一杭, 赵敬德, 张又升. 倾斜矩形腔内接触熔化的实验和理论分析[J]. 太阳能学报, 2018, 39(6): 1559-1565.
LU Y H, ZHAO J D, ZHANG Y S.Experimental and theoretical analysis of contact melting in an inclined rectangular cavity[J]. Acta energiae solaris sinica, 2018, 39(6): 1559-1565.
[10] HIRATA T, MAKINO Y, KANEKO Y.Analysis of close-contact melting for octadecane and ice inside isothermally heated horizontal rectangular capsule[J]. International journal of heat and mass transfer, 1991, 34(12): 3097-3106.
[11] 陈文振, 程尚模. 矩形腔内相变材料接触熔化的分析[J]. 太阳能学报, 1993(3): 202-208.
CHEN W Z, CHENG S M.Analysis of contact melting of rectangular cavity phase change materials[J]. Acta energiae solaris sinica, 1993(3): 202-208.
基金
内蒙自治区科技创新引导奖励资金项目（KCBJ2018031）; 内蒙自治区科技创新引导奖励资金项目（2017CXYD-2）
PDF(2058 KB)
