以某5 MW海上风电机组两级行星一级平行齿轮箱为研究对象,建立以其第一、二、三级齿轮螺旋角（A、B、C）为三自变量因素,以5°、8°、11°、15°为四离散水平的16组正交试验方案,基于Simpack软件完成对应方案的虚拟样机建模及动力学仿真,对各因素各水平下的均载特性、振动特性进行评估,对正交试验结果的有效性进行验证。研究结果表明：行星级的均载特性主要与该级螺旋角有关,同时受螺旋角影响,一般情况下,螺旋角越大,均载特性越好;影响高速输出轴后轴承位置振动的主要因素为第三级齿轮螺旋角,且当C在8°附近时,振动信号较小。研究结果可为大型海上风电机组齿轮螺旋角精细化设计提供理论支撑。
Abstract
A two-stage planetary one-stage parallel gearbox of a 5 MW offshore wind turbine is taken as the research object. 16 sets of orthogonal experimental tests are established and simulated within the virtual prototype software Simpack, in which the helix angles （A,B,C） in different stages are independent variables whose values are 5°, 8°, 11°, 15°, respectively. The even load and vibration characteristic under each factor and level is evaluated and the validity of the orthogonal simulation results is verified. The results show that the even load characteristic of the planetary is mainly related to the helix angle of its stage and affected by helix angles in other stages. In general, the larger the helix angle, the better the even load characteristics. The main factor that affects the vibration signal of the rear bearing position of the high-speed output shaft is C, and when the value of C is 8°, the vibration signal is the weakest. The research results provide theoretical support for the meticulous design of the helix angles of large offshore wind turbines.
关键词
风电机组 /
海水风电 /
斜齿轮 /
动力学 /
振动 /
正交试验 /
均载
Key words
wind turbines /
offshore wind power /
helical gears /
dynamics /
vibration /
orthogonal tests /
even load
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] 孔德群, 刘庆锁, 任政, 等. 18CrNiMo7-6齿轮轴渗碳淬火热处理的氧化分析[J]. 金属热处理, 2016, 41(7): 182-186.
KONG D Q, LIU Q S, REN Z, et al.Oxidation analysis of carburized and hardened 18CrNiMo7-6 gear shaft[J]. Heat treatment of metals, 2016, 41(7): 182-186.
[2] 王付岗, 李成晨, 卓然, 等. MW级风电增速齿轮箱高速轴轴承高温问题研究[J]. 机械传动, 2019, 43(5): 161-166.
WANG F G, LI C C, ZHUO R, et al.Research of high temperature problem of high-speed shaft bearing for MW-class wind power increase gearbox[J]. Journal of mechanical transmission, 2019, 43(5): 161-166.
[3] 陶立壮, 田德, 唐世泽, 等. 基于遗传算法的海上风电机组齿轮箱体积优化[J]. 太阳能学报, 2021, 42(11): 234-239.
TAO L Z, TIAN D, TANG S Z, et al.Volume optimization of offshore wind turbine gearbox based on genetic algorithms[J]. Acta energiae solaris sinica, 2021, 42(11): 234-239.
[4] 王纯, 韩加好, 吉庆. 基于改进粒子群算法的齿轮传动优化设计研究[J]. 机电工程, 2021, 38(2): 239-244.
WANG C, HAN J H, JI Q.Optimization design of gear transmission based on improved particle swarm optimization algorithm[J]. Journal of mechanical and electrical engineering, 2021, 38(2): 239-244.
[5] 张志宏, 刘忠明, 张和平, 等. 大型风电齿轮箱行星架结构分析及优化[J]. 机械设计, 2008(9): 54-56.
ZHANG Z H, LIU Z M, ZHANG H P, et al.Structural analysis and optimization on the plant frame of large scaled gearbox of wind turbine[J]. Journal of machine design, 2008(9): 54-56.
[6] 陈岩松, 朱才朝, 谭建军, 等. 多工况下兆瓦级海上风电齿轮箱均载性能优化设计[J/OL]. 重庆大学学报, 2022: 1-15. https://kns.cnki.net/kcms/detail/50.1044.N.20210508.1518.008.html.
CHEN Y S, ZHU C C, TAN J J, et al. Optimal design of load sharing performance of megawatt level offshore wind turbine gearbox under multi-operating conditions[J]. Journal of Chongqing University, 2022: 1-15. https://kns.cnki.net/kcms/detail/50.1044.N.20210508.1518.008.html
[7] 汤亮, 何仁杰, 龚发云, 等. 基于兆瓦级风电齿轮箱传动特性的齿轮修形研究[J]. 武汉大学学报(工学版), 2019, 52(5): 457-464.
TANG L, HE R J, GONG F Y, et al.Research on gear modification based on transmission characteristics of megawatt wind turbine gearbox[J]. Engineering journal of Wuhan University, 2019, 52(5): 457-464.
[8] 周建星, 孙文磊, 崔权维. 轴承刚度与齿轮螺旋角对减速器振动噪声影响的研究[J]. 机械传动, 2015, 39(5): 20-25.
ZHOU J X, SUN W L, CUI Q W.Research of the effect of bearing stiffness and gear helix angle on vibration noise of gear reducer[J]. Journal of mechanical transmission, 2015, 39(5): 20-25.
[9] LI Z, ZHANG T H, CHEN Y, et al. The Effect of parallel-axis helix gear pair on wind turbine gearbox vibration control[J]. Shock and vibration, 2020: 1-13. https://doi.org/10.1155/2020/8893890.
[10] 高磊, 吴旷怀. 基于正交试验的复合高黏高弹改性沥青制备及性能研究[J]. 公路, 2021(12): 323-329.
GAO L, WU K H.Research on preparation and performance of composite high viscosity and high elastic modified sphalt based on orthogonal test[J]. Highway, 2021(12): 323-329.
[11] 马晓光, 于天龙, 鲍艳秋, 等. 基于整机传动链的风电齿轮箱动力学分析[J]. 机械传动, 2017, 41(4): 120-124.
MA X G, YU T L, BAO Y Q, et al.Dynamics analysis of wind turbine gearbox based on full drivetrain[J]. Journal of mechanical transmission, 2017, 41(4): 120-124.
[12] 饶振纲. 行星齿轮传动设计[M]. 北京: 化学工业出版社, 2014.
RAO Z G.Planetary gear transmission design[M]. Beijing: Chemical Industry Press, 2014.
基金
国家重点研发计划（2018YFB1501304）
PDF(1696 KB)
