With the solar energy as the driving heat source, based on the ejected refrigeration and ORC, a combined power-cooling supply system with the solar ejected refrigeration is constructed, The system is divided into two parts： solar-heat collection subsystem and combined power-cooling supply subsystem. The R161 is used as the circulating working fluid of the combined power-cooling supply subsystem, a thermodynamic model of the system has been established through the Mtalab, and its performance is simulated. Under the design conditions, the refrigerating capacity of the system is 2.893 kW, the net output power is 1.594 kW, the refrigerating efficiency of the combined power-cooling supply subsystem is 12.47%, the power generation efficiency is 6.87%, and the exergy efficiency is 41.45%. According to the exergy analysis, the components with a relatively large exergy loss in the system are the solar heat collector （73.3%）, generator （12.14%）, evaporator （5.03%） and turbine （4.81%）. Considering the actual process, the influence of the changes in the internal parameters of the system and the changes in the external environment parameters on the system is studied separately, It is found that the temperature rise of the high and low pressure generator is beneficial to the improvement of the system performance, at the same time, the efficiency of the heat collector can be all improved by the rise in the ambient temperature and the increase in the solar irradiance, thereby, the performance of the system is enhanced.
Key words
solar ccllector /
solar refrigeration /
incident solar radiation /
exergy /
ejector
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
References
[1] XIA L, LIU R M, ZENG Y T, et al. A review of low-temperature heat recovery technologies for industry processes[J]. Chinese journal of chemical engineering, 2019, 27: 2227-2237.
[2] YANG S, YANG S Y, WANG Y F, et al. Low-grade waste heat recovery with a novel cascade absorption heat transformer[J]. Energy, 2017, 130: 461-472.
[3] OMER G, YAVUZ A H, AHISKA R, et al. Smart thermoelectric waste heat generator: Design, simulation and cost analysis[J]. Sustainable energy technologies and assessments, 2020, 37: 100623.
[4] 汤学忠.热能转换与利用[M]. 北京: 冶金工业出版社, 2011.
TANG X Z.Thermal energy conversion and utilization [M]. Beijing: Metallurgical Industry Press, 2011.
[5] XU B, XU J X, CHEN Z Q.Heat transfer study in solar collector with energy storage[J]. International journal of heat and mass transfer, 2020, 156: 119778.
[6] XU F Y, CHEN Z, LI C Y.Research on the highly energy-efficient conversion and utilization path of solar energy demand type[J]. Renewable & sustainable energy review, 2012, 512-515: 148-154.
[7] ABUULATEEF J M, SOPIAN K, ALGHOUL M A, et al. Review on solar-driven ejector refrigeration technologies[J]. Review on solar-driven ejector refrigeration technologies, 2009, 13(6-7): 1338-1349
[8] HUANG B J, CHANG J M, WANG C P.A 1-D analysis of ejector performance[J]. International journal of refrigeration, 1999, 22(5): 354-364.
[9] KHENNICH M, GALANIS N, SORIN M.Effects of design conditions and irreversibilities on the dimensions of ejectors in refrigeration systems[J]. Applied energy, 2016, 179: 1020-1031.
[10] TCHANCHE B F, PAPADAKIS G, LAMBRINOS G, et al. Fluid selection for a low-temperature solar organic Rankine cycle[J]. Applied thermal engineering, 2009, 29: 2468-2476.
[11] STANCIU D D, SAGHEBIAN S M, KURCHANIA A.The influence of condensing temperature on the efficiency of solar power systems with ORC[J]. Procedia manufacturing, 2020, 46: 359-363.
[12] KEENAN J H, NEUMANN E P, LUSTWERK F.An investigation of ejector design by analysis and experiment[J]. Journal of applied mechanics-transaction of the ASME, 1950, 17: 299-309.
[13] YU W, XU Y, WANG H T, et al. Thermodynamic and thermoeconomic performance analyses and optimization of a novel power and cooling cogeneration system fueled by low-grade waste heat[J]. Applied thermal engineering, 2020, 179: 115667.
PDF(1825 KB)
