The phase change heat storage tank can effectively adjust the contradiction between the supply and demand of the collector and the load end. The water inlet structure and heat storage tank of the annular water distributor are designed, and the performance test platform of the phase change heat storage tank is built. The temperature stratification of the direct type heat storage tank and the heat storage tank of the annular water distributor are compared, and the thermal stratification of the phase change heat storage tank and the heat release performance of the phase change ball under the variables of porosity, water inlet velocity and variable temperature water inlet are explored. The experimental research shows that the annular water distributor can effectively suppress the disturbance of the inlet water flow to the temperature field, maintain good temperature stratification, make the phase change ball release heat layer by layer, increase the temperature difference between the phase change ball and the heat transfer fluid, improve the heat release efficiency, and ensure that the high-temperature water can be continuously provided to the user; The smaller the porosity, the better the delamination effect; The higher the flow velocity is, the worse the stratification effect is, but the heat release efficiency is improved; The heat release time of variable temperature influent is about 40% longer than that of constant temperature influent.
Key words
thermal stratification /
discharging efficiency /
phase change heat storage /
heat storage tank /
annular water distributor /
porosity
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
References
[1] CANTER N.New power source: Extracting energy from the environment[J]. Tribology and lubrication technology, 2020, 76(8): 12-13.
[2] 吴娟, 龙新峰. 太阳能热化学储能研究进展[J]. 化工进展, 2014, 33(12): 3238-3245.
WU J, LONG X F.Research progress of solar thermochemical energy storage[J]. Chemical industry and engineering progress, 2014, 33(12): 3238-3245.
[3] 田松峰, 郁建雄, 刘佳星, 等. 球式相变蓄热装置传热过程数值模拟与优化[J]. 电力科学与工程, 2019, 35(6): 64-70.
TIAN S F, YU J X, LIU J X, et al.Numerical simulation and optimization of heat transfer process of spherical phase change heat storage device[J]. Electric power science and engineering, 2019, 35(6): 64-70.
[4] 李传, 孙泽, 丁玉龙. 高温填充床相变储热球的储热特性[J]. 储能科学与技术, 2013, 2(5): 480-485.
LI C, SUN Z, DING Y L.Heat storage characteristics of high temperature packed bed phase change heat storage ball[J]. Energy storage science and technology, 2013, 2(5): 480-485.
[5] 张伟. 基于球形封装的相变储热供暖装置蓄释热性能的研究[D]. 包头: 内蒙古科技大学, 2020.
ZHANG W.Research on heat storage and release performance of phase change heat storage heating device based on spherical packaging[D]. Baotou: Inner Mongolia University of Science and Technology, 2020.
[6] 周利强, 张华, 王子龙, 等. 相变蓄热水箱分层特性的实验研究[J]. 制冷学报, 2020, 41(1): 62-67.
ZHOU L Q, ZHANG H, WANG Z L, et al.Experimental study on the stratification characteristics of phase change hot water storage tanks[J]. Journal of refrigeration, 2020, 41(1): 62-67.
[7] 王子龙, 张华, 王崇愿, 等. 新型进水结构对太阳能分层水箱热特性影响的研究[J]. 热能动力工程, 2016, 31(5): 124-128, 158.
WANG Z L, ZHANG H, WANG C Y, et al.Research on the influence of new water inlet structure on the thermal characteristics of solar stratified water tanks[J]. Journal of engineering for thermal energy and power, 2016, 31(5): 124-128, 158.
[8] AFSHAN M E, SELVAKUMAR A S, VELRAJ R, et al.Effect of aspect ratio and dispersed PCM balls on the charging performance of a latent heat thermal storage unit for solar thermal applications[J]. Renewable energy, 2020, 148: 876-888.
[9] LOEM S, DEETHAYAT T, ASANAKHAM A, et al.Thermal characteristics on melting/solidification of low temperature PCM balls packed bed with air charging/discharging[J]. Case studies in thermal engineering, 2019, 14: 100431.
[10] GHAJAR A J, ZURIGAT Y H.Numerical study of the effect of inlet geometry on stratification in thermal energy storage[J]. Numerical heat transfer applications, 1991, 19(1): 65-83.
[11] DAVIDSON J H, ADAMS D A, MILLER J A.Coefficient to characterize mixing in solar water storage tanks[J]. Journal of solar energy engineering, 1994, 116(2): 94-99.
[12] 史玉凤, 刘红, 孙文策. 多孔介质有效导热系数的实验与模拟[J]. 四川大学学报(工程科学版), 2011, 43(3): 198-203.
SHI Y F, LIU H, SUN W C.Experiment and simulation of the effective thermal conductivity of porous media[J]. Journal of Sichuan University(engineering science edition), 2011, 43(3): 198-203.
PDF(2101 KB)
