STUDY ON OPTIMIZATION OF THERMAL RECOVERY EFFICIENCY OF GEOTHERMAL WELLS UNDER DIFFERENT WATER INJECTION AND WATER OUTPUT CONDITIONS

Gao Junyi; Shi Qipeng; Xu Chao; Wang Jianwang; Guo Juan; Gao Wenwei

doi:10.19912/j.0254-0096.tynxb.2021-0545

PDF(1855 KB)

Acta Energiae Solaris Sinica ›› 2022, Vol. 43 ›› Issue (11) : 369-375. DOI: 10.19912/j.0254-0096.tynxb.2021-0545

STUDY ON OPTIMIZATION OF THERMAL RECOVERY EFFICIENCY OF GEOTHERMAL WELLS UNDER DIFFERENT WATER INJECTION AND WATER OUTPUT CONDITIONS

Gao Junyi^1~3, Shi Qipeng^1,3, Xu Chao³, Wang Jianwang², Guo Juan², Gao Wenwei²

Author information +

History +

Abstract

Based on the conceptual model of the geothermal exploitation, a 3DEC program is used to calculate and analyze the influence of the three geothermal wells with different water injection and outlet on the temperature field of the rock mass, and geothermal wells and the water temperature of geothermal well outlet. The results show that： 1）the outlet water temperature of production wells is the lowest and approximately same under a steady-state with the layout of wells presenting that the centered injection well （production well） and the peripheral production well （injection well） in numerical model; 2）due to the heat superposition effect in rock mass during the process of water extraction from two adjacent production wells, the outlet water temperature increased greatly. In this situation,the outlet water temperature of production wells is the highest,and it takes the longest time to reach a steady state;3）When the water flow rate of the production well and two adjacent water injection wells doubled, the outlet water temperature will increase due to the increasing water heat transfer, and the time required to reach a steady state is the fastest;4）According to the outlet water temperature of the production wells from high to low, the optimized order of the model is 2 adjacent production wells >2 adjacent water injection wells > 2 spaced production wells=2 spaced water injection wells.

Key words

geothermal well / heat-flow coupling / geothermal field / thermal recovery efficiency / optimization research

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

Gao Junyi, Shi Qipeng, Xu Chao, Wang Jianwang, Guo Juan, Gao Wenwei. STUDY ON OPTIMIZATION OF THERMAL RECOVERY EFFICIENCY OF GEOTHERMAL WELLS UNDER DIFFERENT WATER INJECTION AND WATER OUTPUT CONDITIONS[J]. Acta Energiae Solaris Sinica. 2022, 43(11): 369-375 https://doi.org/10.19912/j.0254-0096.tynxb.2021-0545

References

[1] 于进洋. 西藏羊易高温水热型地热井筒温度场研究[D]. 北京: 中国地质大学, 2013.
YU J Y.Research on the wellbore temperature for geothermal wells in Tibet[D]. Beijing: China University of Geosciences, 2013.
[2] 王鹏, 向衡, 周鑫. 地热井井位部署及合理井间距浅探[J]. 化工管理, 2018, 25(4): 72.
WANG P, XIANG H, ZHOU X.Well location deployment and reasonable well spacing shallow exploration[J]. Chemical enterprise management, 2018, 25(4): 72.
[3] 文乾彬, 梁大川, 谢礼科, 等. 钻井过程中井内温度分布模型概述[J]. 西部探矿工程, 2007, 19(11): 60-63.
WEN Q B, LIANG D C, XIE L K, et al.Review on model of wellbore temperature distribution during drilling[J]. West-China exploration engineering, 2007, 19(11): 60-63.
[4] WU B S, ZHANG X, JEFFREY R G.A model for downhole fluid and rock temperature prediction during circulation[J]. Geothermics, 2014, 50: 202-212.
[5] ANGELOTTI A, ALBERTI L, LICATA I L, et al.Energy performance and thermal impact of a borehole heat exchanger in a sandy aquifer:influnce of the groundwater velocity[J]. Energy conversion and management, 2014, 77: 700-708.
[6] REES S J, HE M M.A three-dimensional numerical model of borehole heat exchanger heat transfer and fluid flow[J]. Geothermics, 2013, 46(10): 1-13.
[7] YOSHIOKA M, TAKAKURA S, UCHIDA Y.Estimation of groundwater flow from temperature monitoring in a borehole heat exchanger during a thermal response test[J]. Hydrogeology journal, 2018, 26: 853-867.
[8] DEHKORDI S E, SCHINCARIOL R A.Effect of thermal-hydrogeological and borehole heat exchanger properties on performance and impact of vertical closed-loop geothermal heat pump systems[J]. Hydrogeology journal, 2014, 22:189-203.
[9] 高俊义. 地热温度和生产井深度对岩体水流-传热温度影响机理研究[J]. 地球物理学进展, 2020, 35(5): 1659-1664.
GAO J Y.Study on mechanism of the influence of geothermal temperature and production well depth on water flow and heat transfer temperature in rock mass[J]. Progress in geophysics,2020, 35(5): 1659-1664.
[10] 高俊义. 基于岩体水流-传热的地热井间距研究[J]. 地球物理学进展, 2020, 35(6): 2058-2063.
GAO J Y.Study on geothermal well spacing based on water flow and heat transfer rock mass[J]. Progress in geophysics, 2020, 35(6): 2058-2063.
[11] 李卫卫, 饶松, 唐晓音, 等. 河北雄县地热田钻井地温测量及地温场特征[J]. 地质科学, 2014, 49(3): 850-863.
LI W W, RAO S, TANG X Y, et al.Borehole temperature logging and temperature field in the Xiongxian county geothermal field, Hebei province[J]. Chinese journal of geology, 2014, 49(3): 850-863.
[12] 申先顺. 关键工序对地热井出水温度和出水量的影响分析[J]. 河南水利与南水北调, 2015(20): 48-49.
SHEN X S.Analysis of the influence of key processes on the water yield and temperature of geothermal wells[J]. Henan water resources & south-to-north water diversion,2015(20): 48-49.
[13] 王磊, 彭兴, 曹莹, 等. 地热生产井井筒内流体温度分布预测研究[J]. 中国矿业, 2015, 24(S1): 376-380.
WANG L, PENG X, CAO Y, et al.The prediction of wellbore fluid temperature distribution of geothermal production well[J]. China mining magazine, 2015, 24(S1): 376-380.
[14] 王发清, 曹建洪, 曹献平, 等. 塔中孔隙性砂岩地热井产液温度影响因素分析[J]. 西部探矿工程, 2018, 30(10) : 45-47.
WANG F Q, CAO J H, CAO X P, et al.Analysis of factors affecting fluid production temperature of porous sandstone geothermal wells in the tower[J]. West-China exploration engineering, 2018, 30(10): 45-47.
[15] 朱明, 段友智, 高小荣, 等. 地热井热损失影响因素敏感性分析[J]. 科技导报, 2015, 33(22): 32-36.
ZHU M, DUAN Y Z, GAO X R,et al.Heat preservation suggestion and heat loss analysis of geothermal well[J]. Science & technology review, 2015, 33(22): 32-36.
[16] 豆惠萍, 陈新海, 朱萍, 等. 供暖地热开采井筒温度损失模型及应用[J]. 地质与勘探, 2019, 55(5): 1276-1286.
DOU H P, CHEN X H, ZHU P, et al.A model of temperature loss in the wellbore of geothermal exploitation for heating and its application[J]. Geology and exploration, 2019, 55(5): 1276-1286.
[17] 王芳, 张晓明, 郑涵之. 抽灌井的布置方式对地下水流场和温度场的影响[J]. 建筑技术开发, 2016, 43(8): 31-35.
WANG F, ZHANG X M, ZHENG H Z.Effect of pumping and irrigation wells arrangement groundwater flow field and temperature field[J]. Building technology development, 2016, 43(8): 31-35.
[18] 马玖辰, 邵刚, 王宇, 等. 抽-灌井分布模式对地埋管换热器井群传热特性的影响[J]. 应用基础与工程科学学报, 2019(5): 1158-1171.
MA J C, SHAO G, WANG Y, et al.Influence of the distribution of pumping and injection wells on heat transfer characteristic of borehole heat exchangers[J]. Journal of basic science and engineering, 2019(5): 1158-1171.
[19] 马玖辰, 邵刚, 谢亚成, 等. 抽-灌井水量对耦合式地埋管井群传热性能的影响[J]. 太阳能学报, 2020, 41(3): 109-118.
MA J C, SHAO G, XIE Y C, et al.Influence of the distribution of pumping and injection wells on heat transfer characteristic of borehole heat exchangers[J]. Acta energiae solaris sinica, 2020, 41(3): 109-118.
[20] 靳孟贵, 汤庆佳, 栗现文. 应用水热运移数值模拟优化地下水源热泵系统抽灌井布局[J]. 地质科技情报, 2012, 31(5): 128-135.
JIN M G, TANG Q J, LI X W.Optimum location of pumping and inj ection wells of groundwater heat exchange system using numerical modeling of water and heat transport[J]. Bulletin of geological science and technology, 2012, 31(5): 128-135.
[21] 徐玉良, 贾超, 贾佳佳, 等. 地下水源热泵抽灌系统优化布置[J]. 水科学与工程技术, 2017(6): 54-59.
XU Y L, JIA C,JIA J J, et al.Study on optimal arrangement of pumping and irrigation system for groundwater heat pump[J]. Water sciences and engineering technology, 2017(6): 54-59.
[22] 李凤昱, 许天福, 封官宏, 等. T2Well单井地下水源热泵水-热耦合数值模拟研究[J]. 太阳能学报, 2020, 41(4): 278-286.
LI F Y, XU T F, FENG G H, et al.Simulation for water-heat coupling process of single well ground source heat pump systems implemented by T2Well[J]. Acta energiae solaris sinica, 2020, 41(4): 278-286.
[23] 马致远, 翟美静, 许勇,等. 砂槽模拟浅源热泵的合理井间距及布局优化——以枫林九溪为例[J]. 水资源与水工程学报, 2018, 29(4): 143-149.
MA Z Y, ZHAI M J, XU Y, et al.Reasonable well spacing and layout optimization of shallow source heat pump using sand trough simulation: a case study in Feuglinjiuxi[J]. Journal of water resources and water engineering, 2018, 29(4): 143-149.