OPTIMIZATION DESIGN OF FOUNDATION REINFORCEMENT SCHEME FOR LOW STRENGTH WIND TURBINE BASED ON PLASTIC DAMAGE MODEL

Sun Linyuan, Huang Hao, Zhen Li, Xia Shifa

Acta Energiae Solaris Sinica ›› 2022, Vol. 43 ›› Issue (4) : 453-460.

PDF(3886 KB)
Welcome to visit Acta Energiae Solaris Sinica, Today is
PDF(3886 KB)
Acta Energiae Solaris Sinica ›› 2022, Vol. 43 ›› Issue (4) : 453-460. DOI: 10.19912/j.0254-0096.tynxb.2021-0906
Topics on Key Technologies for Safety of Electrochemical Energy Storage Systems and Echelon Utilization of Decommissioned Power Batteries

OPTIMIZATION DESIGN OF FOUNDATION REINFORCEMENT SCHEME FOR LOW STRENGTH WIND TURBINE BASED ON PLASTIC DAMAGE MODEL

  • Sun Linyuan, Huang Hao, Zhen Li, Xia Shifa
Author information +
History +

Abstract

In this paper, one of the foundations of wind turbine in a wind farm is taken as an example. Through ABAQUS three-dimensional finite element analysis software, the plastic damage model is used to simulate the reinforcement effect of different schemes, which provides theoretical support for the foundation reinforcement design of actual wind turbine. By comparing and analyzing the changes of maximum stress, damage degree and reinforcement stress of foundation after reinforcement of ring beam with different sizes, it is found that increasing the height of ring beam can effectively improve the bearing capacity of foundation structure, and increasing the width of ring beam can improve the bearing capacity of foundation structure to a certain extent. When the height of ring beam is 1.2 m and the width is 0.6 m, the reinforcement effect is the best which is verified in practical engineering. It is suggested that the finite element method should be used to simulate different reinforcement schemes, compare the reinforcement effects and determine the optimal reinforcement scheme.

Key words

wind turbines / ABAQUS / reinforcement / damage degree / ring beam

Cite this article

Download Citations
Sun Linyuan, Huang Hao, Zhen Li, Xia Shifa. OPTIMIZATION DESIGN OF FOUNDATION REINFORCEMENT SCHEME FOR LOW STRENGTH WIND TURBINE BASED ON PLASTIC DAMAGE MODEL[J]. Acta Energiae Solaris Sinica. 2022, 43(4): 453-460 https://doi.org/10.19912/j.0254-0096.tynxb.2021-0906

References

[1] GB 50010—2010, 混凝土结构设计规范[S].
GB 50010—2010, Code for design of concrele structure[S].
[2] PHAM H V, DIAS D, MIRANDA T, et al. 3D numerical modeling of foundation solutions for wind turbines[J]. International journal of geomechanics, 2018, 18(12):04018164.
[3] 赵妍, 黄昊, 刘致彬.风机基础体外预应力加固方案研究[C]//第七届全国特种混凝土技术交流会暨中国土木工程学会混凝土质量专业委员会2016年年会, 2016.
ZHAO Y, HUANG H, LIU Z B.Research on external prestressed reinforcement scheme of wind turbine foundation[C]//The Seventh National Exchange of Special Concrete Technology and 2016 Annual Meeting of Concrete Quality Committee of China Society of Civil Engineering, 2016.
[4] 汪宏伟.采用环梁加固风机基础的有限元分析[J]. 可再生能源, 2016, 34(4): 558-562.
WANG H W.Finite element analysis of the wind turbine foundation reinforced with ring beam[J]. Renewable energy, 2016, 34(4): 558-562.
[5] 康明虎, 徐慧, 黄鑫.基础环形式风机基础局部损伤分析[J]. 太阳能学报, 2014, 35(4): 583-588.
KANG M H, XU H, HUANG X.Local damage analysis of near foundation ring in wind turbine foundation[J]. Acta energiae solaris sinica, 2014, 35(4): 583-588.
[6] 康明虎.某风电场风机基础故障分析及处理[J]. 可再生能源, 2014, 32(6): 809-813.
KANG M H.Analysis and treatment of wind turbine foundation fault in a wind farm[J]. Renewable energy, 2014, 32(6): 809-813.
[7] CECS 03:2007, 钻芯法检测混凝土强度技术规程[S].
CECS 03:2007, Technical specification for testing concrete strength with drilled core method[S].
PDF(3886 KB)

Accesses

Citation

Detail

Sections
Recommended

/