OPTIMIZATION OF PROCESS PARAMETERS OF BUCKWHEAT STRAW SEEDLING BOXING BASED ON MOPSO

Yang Jie; Zhang Jing; Sun Xinyi; Zhang Yingnan; Zheng Decong

doi:10.19912/j.0254-0096.tynxb.2021-1401

PDF(2661 KB)

Acta Energiae Solaris Sinica ›› 2023, Vol. 44 ›› Issue (5) : 1-9. DOI: 10.19912/j.0254-0096.tynxb.2021-1401

OPTIMIZATION OF PROCESS PARAMETERS OF BUCKWHEAT STRAW SEEDLING BOXING BASED ON MOPSO

Yang Jie¹, Zhang Jing¹, Sun Xinyi², Zhang Yingnan¹, Zheng Decong¹

Author information +

History +

Abstract

Response surface methodology （RSM） is used to study the relationship between three physical properties of biomass seedling pot density, drop breakage rate and pressure breakage rate of buckwheat straw and molding pressure, dosage of binder and holding time. MOPSO optimization algorithm is used to carry out three response optimization analysis of process parameters. The experimental results show that when the pressure is 8-12 MPa, the amount of binder is 60%-90%, and the pressure holding time is 11-14 min, the seedling pot density can reach above 1.041 g/cm³, and the drop damage rate and pressure damage rate are below 2.97% and 2.65%, respectively. When the optimal molding parameters are pressure 11.73 MPa, binder dosage 60.5% and holding time 12.7 min, the seedling pot density reaches 1.168 g/cm³, and the drop damage rate are 2.52% and 2.58%, respectively.

Key words

biomass / optimization / physical properties / straw seedling pot / MOPSO

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

Yang Jie, Zhang Jing, Sun Xinyi, Zhang Yingnan, Zheng Decong. OPTIMIZATION OF PROCESS PARAMETERS OF BUCKWHEAT STRAW SEEDLING BOXING BASED ON MOPSO[J]. Acta Energiae Solaris Sinica. 2023, 44(5): 1-9 https://doi.org/10.19912/j.0254-0096.tynxb.2021-1401

References

[1] 高忠坡, 倪嘉波, 李宁宁. 我国农作物秸秆资源量及利用问题研究[J]. 农机化研究, 2022, 44(4): 1-6, 25.
GAO Z P, NI J B, LI N N.Resources on the quantity and utilization of crop straw resources in China[J]. Journal of agricultural mechanization research, 2022, 44(4): 1-6, 25.
[2] 刘洪杰. 生物质育苗营养钵成型机理与装备研究[D]. 保定: 河北农业大学, 2015.
LIU H J.Biomass seedling nutrition bowl forming mechanism and equipment research[D]. Baoding: Hebei Agricultural University, 2015.
[3] 卜一, 唐超, 李尽朝, 等. 大垄双行荞麦播种机的研制[J]. 干旱地区农业研究, 2016, 34(3): 281-290.
BU Y, TANG C, LI J C, et al.Development of buckwheat planter with two rows in one big ridge[J]. Agricultural research in the arid areas, 2016, 34(3): 281-290.
[4] 梁改梅, 陈稳良, 李秀莲, 等. 荞麦秸秆综合利用探索[J]. 农业开发与装备, 2015(4): 78-80.
LIANG G M, CHEN W L, LI X L, et al.Exploration on comprehensive utilization of buckwheat straw[J]. Agricultural development and equipment, 2015(4): 78-80.
[5] BILES W E.A response surface method for experimental optimization of multi-response processes[J]. Industrial & engineering chemistry process design & development, 1975, 14(2): 152-158.
[6] ALIBRANDI U.A response surface method for stochastic dynamic analysis[J]. Reliability engineering and system safety, 2014, 126: 44-53.
[7] KALIL S J, MAUGERI F, RODRIGUES M I.Response surface analysis and simulation as a tool for bioprocess design and optimization[J]. Process biochemistry, 2000, 35(6): 539-550.
[8] VENKATES V, GOYAL S.Expectation disconfirmation and technology adoption: polynomial modeling and response surface analysis[J]. MIS quarterly, 2010, 34(2): 281-303.
[9] 谢承旺, 李凯, 徐君, 等. 一种改进型多目标粒子群优化算法MOPSO-Ⅱ[J]. 武汉大学学报(理学版), 2014, 60(2): 144-150.
XIE C W, LI K, XU J, et al.An improved multi-objective particle swarm optimization algorithm MOPSO-Ⅱ[J]. Journal of Wuhan University (science edition), 2014, 60(2): 144-150.
[10] 冯金芝, 陈兴, 郑松林. 一种改进的多目标粒子群优化算法及其应用[J]. 计算机应用研究, 2014, 31(3): 675-678, 683.
FENG J Z, CHEN X, ZHENG S L.Improved MOPSO algorithm and its application[J]. Application research of computers, 2014, 31(3): 675-678, 683.
[11] 刘衍民, 赵庆祯, 隋常玲. 基于动态多种群的多目标粒子群算法[J]. 计算机仿真, 2011, 28(5): 241-245.
LIU Y M, ZHAO Q Z, SUI C L.Multi-objective particle swarm optimizer based on dynamic multi-swarm[J]. Computer simulation, 2011, 28(5): 241-245.
[12] 马方, 陈中玉. 可降解秸秆育苗钵粘结剂的实验研究[J]. 吉林农业, 2010(12): 93.
MA F, CHEN Z Y.Experimental study on the bonder of degradable straw seedling bottle[J]. Agriculture of Jilin, 2010(12): 93.
[13] 白晓虎, 李芳, 张祖立, 等. 秸秆挤压成型育苗钵的试验研究[J]. 农机化研究, 2008 (2): 136-138.
BAI X H, LI F, ZHANG Z L, et al.Experimental study on seedling pot extruded by straw[J]. Journal of agricultural mechanization research, 2008(2): 136-138.
[14] ASTM D440-86, Standard test method of drop shatter test for coal[S].
[15] 王慧杰, 冯瑞云, 刘跃鹏, 等. 秸秆育苗钵旋压成型制钵机的研制[J]. 中国农机化学报, 2017, 38(4): 37-41.
WANG H J, FENG R Y, LIU Y P, et al.Design of spin-forming machine for seedling pot made from straw[J]. Chinese journal of agricultural mechanization, 2017, 38(4): 37-41.
[16] 陈炜. 一种动态分群的自适应粒子群优化算法[J]. 信息技术, 2015(1): 101-104.
CHEN W.An adaptive particle swarm optimization algorithm with dynamic sub-swarms[J]. Information technology, 2015(1): 101-104.
[17] 程军. 基于生物行为机制的粒子群算法改进及应用[D]. 广州: 华南理工大学, 2014.
CHENG J.Modification and application of particle swarm optimization algorithm based on biological behavior mechanism[D]. Guangzhou: South China University of Technology, 2014.
[18] 郭康权, 赵东. 植物秸秆模压成型流变特性的试验研究[J]. 西北农林科技大学学报(自然科学版), 1995, 23(3): 11-15.
GUO K Q, ZHAO D.An experimental study on the reological properties of the cornstalk in the mold press process[J]. Journal of Northwest A&F University (natural science edition), 1995, 23(3): 11-15.
[19] 高明强, 孟献梁, 田军月, 等. 生物质型煤冷压成型工艺研究[J]. 能源技术与管理, 2014, 39(6): 13-16.
GAO M Q, MENG X L, TIAN J Y, et al.Study on cold pressing forming technology of biomass briquette[J]. Energy technology and management, 2014, 39(6): 13-16.
[20] 陈兴国, 黄文城, 张林, 等. 甘蔗渣冷压成型的影响因素研究[J]. 中国农机化学报, 2019, 40(12): 81-86.
CHEN X G, HUANG W C, ZHANG L, et al.Factors affecting cold pelleting of sugarcane bagasse[J]. Journal of Chinese agricultural mechanization, 2019, 40(12): 81-86.
[21] 张静, 郭玉明, 武翠卿, 等. 柠条热压成型工艺参数研究及燃料物性分析[J]. 太阳能学报, 2014, 35(10): 1842-1849.
ZHANG J, GUO Y M, WU C Q, et al.Study on process parameters of caragana korshinskii kom hot briquetting and analysis of physical properties for the solid fuel briquette[J]. Acta energiae solaris sinica, 2014, 35(10): 1842-1849.
[22] 张静, 刘正光, 郑德聪, 等. 基于马氏距离法的谷秆固体燃料成型工艺参数优化[J]. 太阳能学报, 2018, 39(6): 1658-1666.
ZHANG J, LIU Z G, ZHENG D C, et al.Optimization of molding process parameters of millet straw solid fuel based on Mahalanobis distance function[J]. Acta energiae solaris sinimca, 2018, 39(6): 1658-1666.