COST PREDICTION OF PEROVSKITE PHOTOVOLTAIC MODULES

Li Bin; Shu Ankang; Peng Yong

doi:10.19912/j.0254-0096.tynxb.2023-1432

PDF(2075 KB)

Acta Energiae Solaris Sinica ›› 2024, Vol. 45 ›› Issue (4) : 91-100. DOI: 10.19912/j.0254-0096.tynxb.2023-1432

COST PREDICTION OF PEROVSKITE PHOTOVOLTAIC MODULES

Li Bin¹, Shu Ankang², Peng Yong^1,2

Author information +

History +

Abstract

The review provides calculation methods for the cost per watt and levelized cost of energy of perovskite photovoltaic modules. Combining with the production technology routes of perovskite photovoltaic modules, the paper discusses and calculates the cost per watt of perovskite photovoltaic modules by considering material costs, production line costs, and depreciation of production lines during manufacturing. Additionally, the levelized cost of energy of perovskite photovoltaic modules is calculated and forecasted. A comparative analysis is conducted between the levelized cost of energy of perovskite photovoltaic modules and those of thermal power, hydroelectric power, and wind power, aiming to provide valuable insights for enterprises and research institutes engaged in the manufacture of perovskite photovoltaic modules.

Key words

perovskite solar cells / cost per watt / levelized cost of energy / film technology / photovoltaic technology / cost analysis

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

Li Bin, Shu Ankang, Peng Yong. COST PREDICTION OF PEROVSKITE PHOTOVOLTAIC MODULES[J]. Acta Energiae Solaris Sinica. 2024, 45(4): 91-100 https://doi.org/10.19912/j.0254-0096.tynxb.2023-1432

References

[1] KOJIMA A, TESHIMA K, SHIRAI Y, et al.Organometal halide perovskites as visible-light sensitizers for photovoltaic cells[J]. Journal of the American Chemical Society, 2009, 131(17): 6050-6051.
[2] LEE M M, TEUSCHER J, MIYASAKA T, et al.Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites[J]. Science, 2012, 338(6107): 643-647.
[3] KIM H S, LEE C R, IM J H, et al.Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%[J]. Scientific reports, 2012, 2: 591.
[4] LIU M Z, JOHNSTON M B, SNAITH H J.Efficient planar heterojunction perovskite solar cells by vapour deposition[J]. Nature, 2013, 501(7467): 395-398.
[5] BURSCHKA J, PELLET N, MOON S J, et al.Sequential deposition as a route to high-performance perovskite-sensitized solar cells[J]. Nature, 2013, 499(7458): 316-319.
[6] ZHOU H P, CHEN Q, LI G, et al.Interface engineering of highly efficient perovskite solar cells[J]. Science, 2014, 345(6196): 542-546.
[7] YANG W S, NOH J H, JEON N J, et al.High-performance photovoltaic perovskite layers fabricated through intramolecular exchange[J]. Science, 2015, 348(6240): 1234-1237.
[8] LI X, BI D Q, YI C Y, et al.A vacuum flash-assisted solution process for high-efficiency large-area perovskite solar cells[J]. Science, 2016, 353(6294): 58-62.
[9] LI Z, KLEIN T R, KIM D H, et al.Scalable fabrication of perovskite solar cells[J]. Nature reviews materials, 2018, 3(4): 18017.
[10] PARK N G, ZHU K.Scalable fabrication and coating methods for perovskite solar cells and solar modules[J]. Nature reviews materials, 2020, 5: 333-350.
[11] CUI P, QU S J, ZHANG Q, et al.Homojunction perovskite solar cells: opportunities and challenges[J]. Energy materials, 2022, 1(2): 100014.
[12] 李毅, 朱俊, 张旭辉, 等. CH₃NH₃PbI₃形貌对钙钛矿电池性能的影响研究[J]. 太阳能学报, 2019, 40(9): 2630-2635.
LI Y, ZHU J, ZHANG X H, et al.Investigation on morphology-photovoltaic property correlation in perovskite solar cells[J]. Acta energiae solaris sinica, 2019, 40(9): 2630-2635.
[13] XIA Y, ZHU M, QIN L, et al.Organic-inorganic hybrid quasi-2D perovskites incorporated with fluorinated additives for efficient and stable four-terminal tandem solar cells[J]. Energy materials, 2023, 3(1): 300004.
[14] QI Q C, KE H Z, YE L.Ternary organic solar cells featuring polythiophene[J]. Energy materials, 2022, 2(5): 35.
[15] YANG M Q, WEI W K, ZHOU X, et al.Non-fused ring acceptors for organic solar cells[J]. Energy materials, 2022, 1(1): 100008.
[16] MASSIOT I, CATTONI A, COLLIN S.Progress and prospects for ultrathin solar cells[J]. Nature energy, 2020, 5: 959-972.
[17] National Renewable Energy Laboratory (NREL). Best research-cell efficiency chart [EB/OL]. https://www.nrel.gov/pv/assets/pdfs/best-research-cell-efficiencies. pdf.(2023-08-29).
[18] CHANG N L, HO-BAILLIE A W Y, VAK D, et al. Manufacturing cost and market potential analysis of demonstrated roll-to-roll perovskite photovoltaic cell processes[J]. Solar energy materials and solar cells, 2018, 174: 314-324.
[19] 张云龙, 陈新亮, 周忠信, 等. 晶体硅太阳电池研究进展[J]. 太阳能学报, 2021, 42(10): 49-60.
ZHANG Y L, CHEN X L, ZHOU Z X, et al.Research progress of crystalline silicon solar cells[J]. Acta energiae solaris sinica, 2021, 42(10): 49-60.
[20] CAI M L, WU Y Z, CHEN H, et al.Cost-performance analysis of perovskite solar modules[J]. Advanced science, 2016, 4(1): 1600269.
[21] National Renewable Energy Laboratory (NREL). Simple levelized cost of energy (LCOE) calculator documentation [EB/OL].https://www.nrel.gov/analysis/tech-lcoe-docume ntation.html.
[22] SEO S, JEONG S, PARK H, et al.Atomic layer deposition for efficient and stable perovskite solar cells[J]. Chemical communications, 2019, 55(17): 2403-2416.
[23] GIORDANO F, ABATE A, CORREA BAENA J P, et al. Enhanced electronic properties in mesoporous TiO₂ via lithium doping for high-efficiency perovskite solar cells[J]. Nature communications, 2016, 7: 10379.
[24] JIANG Q, ZHANG L Q, WANG H L, et al.Enhanced electron extraction using SnO₂ for high-efficiency planar-structure HC(NH₂)₂PbI₃- based perovskite solar cells[J]. Nature energy, 2016, 2: 16177.
[25] TAN B E, RAGA S R, CHESMAN A S R, et al. LiTFSI-free spiro-OMeTAD-based perovskite solar cells with power conversion efficiencies exceeding 19%[J]. Advanced energy materials, 2019, 9(32): 1901519.
[26] JUNG E H, JEON N J, PARK E Y, et al.Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)[J]. Nature, 2019, 567(7749): 511-515.
[27] YANG G, NI Z Y, YU Z J, et al.Defect engineering in wide-bandgap perovskites for efficient perovskite-silicon tandem solar cells[J]. Nature photonics, 2022, 16: 588-594.
[28] XIE Y M, YAO Q, XUE Q F, et al.Subtle side chain modification of triphenylamine-based polymer hole-transport layer materials produces efficient and stable inverted perovskite solar cells[J]. Interdisciplinary materials, 2022, 1(2): 281-293.
[29] XIONG J, QI Y F, ZHANG Q Q, et al.Enhanced moisture and water resistance in inverted perovskite solar cells by poly(3-hexylthiophene)[J]. ACS applied energy materials, 2021, 4(2): 1815-1823.
[30] HAN W B, REN G H, LIU J M, et al.Recent progress of inverted perovskite solar cells with a modified PEDOT: PSS hole transport layer[J]. ACS applied materials & interfaces, 2020, 12(44): 49297-49322.
[31] YE F Y, ZHANG S, WARBY J, et al.Overcoming C₆₀-induced interfacial recombination in inverted perovskite solar cells by electron-transporting carborane[J]. Nature communications, 2022, 13(1): 7454.
[32] LIU D Y, WANG Q, TRAVERSE C J, et al.Impact of ultrathin C₆₀ on perovskite photovoltaic devices[J]. ACS nano, 2018, 12(1): 876-883.
[33] KAKAVELAKIS G, MAKSUDOV T, KONIOS D, et al.Efficient and highly air stable planar inverted perovskite solar cells with reduced graphene oxide doped PCBM electron transporting layer[J]. Advanced energy materials, 2017, 7(7): 1602120.
[34] LIN X S, CUI D Y, LUO X H, et al.Efficiency progress of inverted perovskite solar cells[J]. Energy & environmental science, 2020, 13(11): 3823-3847.
[35] LIU Q J, ZHAO Y N, MA Y X, et al.A mixed solvent for rapid fabrication of large-area methylammonium lead iodide layers by one-step coating at room temperature[J]. Journal of materials chemistry A, 2019, 7(31): 18275-18284.
[36] CHIANG C H, NAZEERUDDIN M K, GRÄTZEL M, et al. The synergistic effect of H₂O and DMF towards stable and 20% efficiency inverted perovskite solar cells[J]. Energy & environmental science, 2017, 10(3): 808-817.
[37] LIAO H C, GUO P J, HSU C P, et al.Enhanced efficiency of hot-cast large-area planar perovskite solar cells/modules having controlled chloride incorporation[J]. Advanced energy materials, 2017, 7(8): 1601660.
[38] WANG C, TAN G Y, LUO X P, et al.How to fabricate efficient perovskite solar mini-modules in lab[J]. Journal of power sources, 2020, 466: 228321.
[39] CHIANG C H, LIN J W, WU C G.One-step fabrication of a mixed-halide perovskite film for a high-efficiency inverted solar cell and module[J]. Journal of materials chemistry A, 2016, 4(35): 13525-13533.
[40] HEO J H, HAN H J, KIM D, et al.Hysteresis-less inverted CH₃NH₃PbI₃ planar perovskite hybrid solar cells with 18.1% power conversion efficiency[J]. Energy & environmental science, 2015, 8(5): 1602-1608.
[41] BU T L, LIU X P, LI J, et al.Dynamic antisolvent engineering for spin coating of 10×10 cm² perovskite solar module approaching 18%[J]. Solar RRL, 2020, 4(2): 1900263.
[42] HIGUCHI H, NEGAMI T. Largest highly efficient 203 × 203 mm² CH₃NH₃PbI₃ perovskite solar modules[J]. Japanese journal of applied physics, 2018, 57(8S3): 08RE11.
[43] YANG M J, KIM D H, KLEIN T R, et al.Highly efficient perovskite solar modules by scalable fabrication and interconnection optimization[J]. ACS energy letters, 2018, 3(2): 322-328.
[44] XU M, JI W X, SHENG Y S, et al.Efficient triple-mesoscopic perovskite solar mini-modules fabricated with slot-die coating[J]. Nano energy, 2020, 74: 104842.
[45] BASHIR A, HAUR L J, SHUKLA S, et al.Cu-doped nickel oxide interface layer with nanoscale thickness for efficient and highly stable printable carbon-based perovskite solar cell[J]. Solar energy, 2019, 182: 225-236.
[46] LIM K S, LEE D K, LEE J W, et al.17% efficient perovskite solar mini-module via hexamethylphosphoramide (HMPA)-adduct-based large-area D-bar coating[J]. Journal of materials chemistry A, 2020, 8(18): 9345-9354.
[47] HEO J H, LEE M H, JANG M H, et al.Highly efficient CH₃NH₃PbI₃-_xCl_xmixed halide perovskite solar cells prepared by re-dissolution and crystal grain growth via spray coating[J]. Journal of materials chemistry A, 2016, 4(45): 17636-17642.
[48] TIAN W J, SONG P Q, ZHAO Y P, et al.Monolithic bilayered In₂O₃ as an efficient interfacial material for high-performance perovskite solar cells[J]. Interdisciplinary materials, 2022, 1(4): 526-536.
[49] RICHARDS D, BURKITT D, PATIDAR R, et al.Predicting a process window for the roll-to-roll deposition of solvent-engineered SnO₂ in perovskite solar cells[J]. Materials advances, 2022, 3(23): 8588-8596.
[50] ZHU C, WANG X, LI H X, et al.Stress compensation based on interfacial nanostructures for stable perovskite solar cells[J]. Interdisciplinary materials, 2023, 2(2): 348-359.
[51] 杜林, 彭长涛, 唐宇, 等. 2-巯基嘧啶界面钝化改善钙钛矿太阳电池性能[J]. 太阳能学报, 2022, 43(9): 73-77.
DU L, PENG C T, TANG Y, et al.Interfacial passivation for enhanced performance of perovskite solar cells via by 2-mercaptopyrimidine[J]. Acta energiae solaris sinica, 2022, 43(9): 73-77.
[52] CHEN C S, RAN C X, YAO Q, et al.Screen-printing technology for scale manufacturing of perovskite solar cells[J]. Advanced science, 2023, 10(28): e2303992.