CONTACT FATIGUE LIFE STUDY OF WIND TURBINE GEARBOX BASED ON MULTIAXIAL FATIGUE CRITERION

Gu Huiyun; Zhou Jianxing; Cui Quanwei; Fei Xiang; Wen Jianmin; Fang Zhong

doi:10.19912/j.0254-0096.tynxb.2025-0165

PDF(4882 KB)

Acta Energiae Solaris Sinica ›› 2026, Vol. 47 ›› Issue (6) : 372-383. DOI: 10.19912/j.0254-0096.tynxb.2025-0165

CONTACT FATIGUE LIFE STUDY OF WIND TURBINE GEARBOX BASED ON MULTIAXIAL FATIGUE CRITERION

Gu Huiyun¹, Zhou Jianxing¹, Cui Quanwei¹, Fei Xiang¹, Wen Jianmin^1,2, Fang Zhong²

Author information +

History +

Abstract

Wind turbine gearboxes are subjected to contact loads during operation, resulting in contact fatigue damage in the gears, which significantly affects their service life. To accurately predict the contact fatigue life of gears, this study takes a 6 MW wind turbine gearbox operating at Dabancheng Wind Farm, Xinjiang, as the research object. A gearbox dynamic model considering both internal and external excitations is established to calculate the dynamic meshing forces of each helical gear pair. The analysis incorporates local material properties and residual stresses in the gears. By applying the Dang Van multiaxial fatigue criterion combined with S-N curves, the fatigue damage distribution in the helical gears under contact loading is analyzed. Fatigue hotspots are identified, and critical operating conditions are extracted to develop a surrogate model, which quantifies the contact fatigue damage and estimates the contact fatigue life of each gear over a 20-year design period. The results indicate that the engage-in and recess points of external meshing pairs in helical gears are the primary fatigue hotspots, making them more susceptible to fatigue failure. Among all gears, the sun gears exhibit the most severe contact fatigue damage, with estimated contact fatigue life of 8 years for the high-speed sun gear and 21 years for the low-speed sun gear. Conversely, the planetary gears in both stages show relatively lower fatigue damage, with their contact fatigue life exceeding 30 years. The ring gear experiences the least fatigue damage, resulting in an exceptionally long service life.

Key words

gears / wind turbines / fatigue damage / multiaxial fatigue criterion / contact loads / key operating conditions

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

Gu Huiyun, Zhou Jianxing, Cui Quanwei, Fei Xiang, Wen Jianmin, Fang Zhong. CONTACT FATIGUE LIFE STUDY OF WIND TURBINE GEARBOX BASED ON MULTIAXIAL FATIGUE CRITERION[J]. Acta Energiae Solaris Sinica. 2026, 47(6): 372-383 https://doi.org/10.19912/j.0254-0096.tynxb.2025-0165

References

[1] 张秀华, 刘怀举, 朱才朝, 等. 基于数据驱动的零部件疲劳寿命预测研究现状与发展趋势[J]. 机械传动, 2021, 45(10): 1-14.
ZHANG X H, LIU H J, ZHU C C, et al.Current situation and developing trend of fatigue life prediction of components based on data-driven[J]. Journal of mechanical transmission, 2021, 45(10): 1-14.
[2] LI N P, XU P C, LEI Y G, et al.A self-data-driven method for remaining useful life prediction of wind turbines considering continuously varying speeds[J]. Mechanical systems and signal processing, 2022, 165: 108315.
[3] FENG Y H, QIU Y N, CRABTREE C J, et al.Monitoring wind turbine gearboxes[J]. Wind energy, 2013, 16(5): 728-740.
[4] NEJAD A R, GAO Z, MOAN T.On long-term fatigue damage and reliability analysis of gears under wind loads in offshore wind turbine drivetrains[J]. International journal of fatigue, 2014, 61: 116-128.
[5] DONG W B, NEJAD A R, MOAN T, et al.Structural reliability analysis of contact fatigue design of gears in wind turbine drivetrains[J]. Journal of loss prevention in the process industries, 2020, 65: 104115.
[6] 毛天雨, 余泳, 刘怀举, 等. 飞行汽车齿轮传动系统动态可靠性分析[J]. 机械传动, 2021, 45(6): 96-103, 176.
MAO T Y, YU Y, LIU H J, et al.Dynamic reliability analysis of flying car gear transmission system[J]. Journal of mechanical transmission, 2021, 45(6): 96-103, 176.
[7] HE H F, LIU H J, ZHU C C, et al.Study on the gear fatigue behavior considering the effect of residual stress based on the continuum damage approach[J]. Engineering failure analysis, 2019, 104: 531-544.
[8] WANG W, LIU H J, ZHU C C, et al.Effect of the residual stress on contact fatigue of a wind turbine carburized gear with multiaxial fatigue criteria[J]. International journal of mechanical sciences, 2019, 151: 263-273.
[9] 谭建军, 伍源, 白杨, 等. 考虑环境参数的风电齿轮箱传动系统疲劳性能优化[J]. 机械传动, 2023, 47(8): 53-63.
TAN J J, WU Y, BAI Y, et al.Fatigue performance optimization of the wind turbine gearbox transmission system considering environmental parameters[J]. Journal of mechanical transmission, 2023, 47(8): 53-63.
[10] VULLO V.Gears: Volume 1: geometric and kinematic design[M]. Cham: Springer International Publishing, 2020: 1-820.
[11] 庞冬雪. 海上风机大功率齿轮传动系统的动力学建模及其时变可靠性评估研究[D]. 杭州: 浙江理工大学, 2022.
PANG D X.Dynamic modeling and time-variant reliability evaluation of high power gear transmission system of offshore wind turbine[D]. Hangzhou: Zhejiang Sci-Tech University, 2022.
[12] REZAEI M, POURSINA M, JAZI S H, et al.Calculation of time dependent mesh stiffness of helical planetary gear system using analytical approach[J]. Journal of mechanical science and technology, 2018, 32(8): 3537-3545.
[13] CHEN Z G, SHAO Y M.Dynamic simulation of spur gear with tooth root crack propagating along tooth width and crack depth[J]. Engineering failure analysis, 2011, 18(8): 2149-2164.
[14] IEC 61400-1, Wind energy generation systems-part 1: design requirements[S].
[15] 路志成, 周建星, 崔权维, 等. 基于动力学的风力机齿轮传动系统可靠性研究[J]. 太阳能学报, 2023, 44(9): 397-404.
LU Z C, ZHOU J X, CUI Q W, et al.Research on reliability of gear transmission system of wind turbine based on dynamics[J]. Acta energiae solaris sinica, 2023, 44(9): 397-404.
[16] 周建星, 孙文磊, 曹莉, 等. 行星齿轮传动系统碰撞振动特性研究[J]. 西安交通大学学报, 2016, 50(3): 16-21.
ZHOU J X, SUN W L, CAO L, et al.Vibro-impact characteristics of planetary gear transmission[J]. Journal of Xi’an Jiaotong University, 2016, 50(3): 16-21.
[17] GB/Z3480.4—2024, 直齿轮和斜齿轮承载能力计算第4部分:齿面断裂承载能力计算[S].
GB/Z3480.4—2024, Calculation of load capacity of spur and helical gears: Part 4: calculation of tooth flank fracture load capacity[S].
[18] GB/T3480.5—2021, 直齿轮和斜齿轮承载能力计算第5部分:材料的强度和质量[S].
GB/T3480.5—2021, Calculation of load capacity of spur and helical gears: Part 5: strength and quality of materials[S].
[19] GB/T 33362—2016, 金属材料硬度值的换算[S].
GB/T 33362—2016, Metallic materials-conversion of hardness values[S].
[20] BÖHME S A, SZANTI G, KESKI-RAHKONEN J, et al. Tooth flank fracture-an applied fatigue study of case hardened bevel gears[J]. Engineering failure analysis, 2022, 132: 105911.
[21] VELEX P.Mechanical engineering ch. 4: on the modelling of spur and helical gear dynamic behaviour[M]. Rijeka: IntechOpen, 2012: 75-106.
[22] JOHNSON K L.Contact mechanics[M]. Cambridge: Cambridge University Press, 1987: 1-452.
[23] DONG W B, XING Y H, MOAN T, et al.Time domain-based gear contact fatigue analysis of a wind turbine drivetrain under dynamic conditions[J]. International journal of fatigue, 2013, 48: 133-146.
[24] 柏厚义, 朱才朝, 周烨, 等. 风电渗碳齿轮内部疲劳断裂可靠性研究[J]. 振动与冲击, 2023, 42(7): 106-113, 132.
BAI H Y, ZHU C C, ZHOU Y, et al.Study on the reliability of tooth interior fatigue fracture in carburized wind turbine gear[J]. Journal of vibration and shock, 2023, 42(7): 106-113, 132.
[25] (荷)亚伯·斯海维(Jaap Schijve)著,吴学仁等译. 结构与材料的疲劳[M]. 北京: 航空工业出版社, 2014: 1-567.
JAAP S.Fatigue of structures and materials[M]. Beijing: Aviation Industry Press, 2014: 1-567.
[26] LIU H L, LIU H J, BOCHER P, et al.Effects of case hardening properties on the contact fatigue of a wind turbine gear pair[J]. International journal of mechanical sciences, 2018, 141: 520-527.
[27] GERMANISCHER L.Rules and guidelines IV industrial services: part I: guideline for the certification of wind turbines[M]. Hamburg: Germanischer Lloyd, 2010: 1-384.
[28] BÖHME S A, VINOGRADOV A, PAPUGA J, et al. A novel predictive model for multiaxial fatigue in carburized bevel gears[J]. Fatigue & fracture of engineering materials & structures, 2021, 44(8): 2033-2053.
[29] 伍源, 朱才朝, 谭建军, 等. 环境参数对风电齿轮箱传动系统疲劳损伤的影响[J]. 重庆大学学报, 2024, 47(3): 132-144.
WU Y, ZHU C C, TAN J J, et al.Effects of environmental parameters on fatigue damage of wind turbine gearbox transmission system[J]. Journal of Chongqing University (natural science edition), 2024, 47(3): 132-144.