软黏土中吸力式三桶基础承载特性分析

汪明元; 陆佳清; 巴盼锋; 程星磊; 鹿群

doi:10.19912/j.0254-0096.tynxb.2023-0257

PDF(3633 KB)

太阳能学报 ›› 2024, Vol. 45 ›› Issue (6) : 589-598. DOI: 10.19912/j.0254-0096.tynxb.2023-0257

软黏土中吸力式三桶基础承载特性分析

汪明元¹, 陆佳清², 巴盼锋², 程星磊², 鹿群²

作者信息 +

ANALYSIS OF BEARING CHARACTERISTIC OF TRIPOD SUCTION BUCKET FOUNDATION IN SOFT CLAY

Wang Mingyuan¹, Lu Jiaqing², Ba Panfeng², Cheng Xinglei², Lu Qun²

Author information +

文章历史 +

摘要

采用弹塑性边界面本构模型,建立模拟黏土中三桶基础承载行为的三维数值方法,并通过对已有模型试验结果的预测验证数值方法的可行性。研究桶-土接触方式和加载方向对三桶基础承载行为的影响规律,探索三桶基础的水平循环承载特性。结果表明,竖向单调荷载作用下三桶基础表现为“刺入型”剪切破坏特征,基础竖向受压失效位移约为0.07D(D为桶基础的直径);在摩擦接触条件下,0°水平加载（单桶受拉,双桶受压）极限承载力最小;在绑定接触条件下,60°水平加载（双桶受拉,单桶受压）极限承载力最小;循环荷载作用下迎风桶与背风桶之间逐渐增加的沉降差是三桶基础产生累积旋转的主要原因,且基础的旋转特性与水平循环荷载大小密切相关。

Abstract

A three-dimensional numerical method is developed to simulate the bearing behavior of tripod suction bucket in clays by employing an elastic-plastic bounding surface constitutive model, and then the feasibility of the numerical method is verified by predicting the existing model test results. The effects of bucket-soil contact mode and loading direction on the bearing behavior of tripod suction bucket is studied, and its bearing characteristics under lateral cyclic load are explored. The research results show that the tripod suction bucket under vertical load is characterized by "piercing" shear failure, and the failure displacement of vertical compressive foundation is about 0.07D (D is the bucket diameter）. The ultimate bearing capacity at 0° horizontal loading direction （single bucket under uplift, double bucket under compression） is the smallest under the friction contact condition; the ultimate bearing capacity at 60° horizontal loading direction （double bucket under uplift, single bucket under compression） is the smallest under the tie contact condition. The increasing of settlement difference between the windward bucket and the leeward bucket under cyclic load is the main reason for the cumulative rotation of the tripod bucket foundation, and the rotation characteristics of the foundation are closely related to the horizontal cyclic load scale.

导出引用

汪明元, 陆佳清, 巴盼锋, 程星磊, 鹿群. 软黏土中吸力式三桶基础承载特性分析[J]. 太阳能学报. 2024, 45(6): 589-598 https://doi.org/10.19912/j.0254-0096.tynxb.2023-0257

Wang Mingyuan, Lu Jiaqing, Ba Panfeng, Cheng Xinglei, Lu Qun. ANALYSIS OF BEARING CHARACTERISTIC OF TRIPOD SUCTION BUCKET FOUNDATION IN SOFT CLAY[J]. Acta Energiae Solaris Sinica. 2024, 45(6): 589-598 https://doi.org/10.19912/j.0254-0096.tynxb.2023-0257

中图分类号： TU473

参考文献

[1] HOULSBY G T, BYRNE B W.Suction caisson foundations for offshore wind turbines and anemometer masts[J]. Wind engineering, 2000, 24(4): 249-255.
[2] WANG L Z, WANG H, ZHU B, et al.Comparison of monotonic and cyclic lateral response between monopod and tripod bucket foundations in medium dense sand[J]. Ocean engineering, 2018, 155: 88-105.
[3] BYRNE B W, HOULSBY G T.Experimental investigations of response of suction caissons to transient vertical loading[J]. Journal of geotechnical and geoenvironmental engineering, 2002, 128(11): 926-939.
[4] 寇海磊, 周楠, 杨丹良, 等. 砂土地基中海上风机吸力桶基础水平承载特性试验研究[J]. 工程地质学报, 2021, 29(6): 1752-1758.
KOU H L, ZHOU N, YANG D L, et al.Study on horizontal bearing capacity of suction bucket foundation for offshore wind power in soil[J]. Journal of engineering geology, 2021, 29(6): 1752-1758.
[5] 李大勇, 张景睿, 张雨坤, 等. 饱和砂土中裙式吸力基础水平循环特性和累积转角变化规律[J]. 岩土力学, 2021, 42(3): 611-619.
LI D Y, ZHANG J R, ZHANG Y K, et al.Bearing behavior and accumulated rotation of modified suction caisson (MSC) in saturated sand under cyclic loading[J]. Rock and soil mechanics, 2021, 42(3): 611-619.
[6] VILLALOBOS F A, BYRNE B W, HOULSBY G T.Model testing of suction caissons in clay subjected to vertical loading[J]. Applied ocean research, 2010, 32(4): 414-424.
[7] 朱斌, 应盼盼, 郭俊科, 等. 海上风电机组吸力式桶形基础承载力分析与设计[J]. 岩土工程学报, 2013, 35(S1): 443-450.
ZHU B, YING P P, GUO J K, et al.Analysis and design of bearing capacity of suction bucket foundation for offshore wind turbine[J]. Chinese journal of geotechnical engineering, 2013, 35(S1): 443-450.
[8] 闫澍旺, 霍知亮, 楚剑, 等. 黏土中负压桶形基础下沉与承载特性试验及有限元分析研究[J]. 工程力学, 2016, 33(1): 122-132.
YAN S W, HUO Z L, CHU J, et al.Test and fea of installation and axial behavior of suction caisson in clay[J]. Engineering mechanics, 2016, 33(1): 122-132.
[9] 国振, 王立忠, 袁峰. 粘土中吸力锚沉贯阻力与土塞形成试验研究[J]. 海洋工程, 2011, 29(1): 9-17.
GUO Z, WANG L Z, YUAN F.An experimental investigation of insertion resistance and soil heave during caisson installation in soft clay[J]. The ocean engineering, 2011, 29(1): 9-17.
[10] 黎冰, 郑翔, 高玉峰, 等. 砂土中吸力式沉箱基础抗拔承载特性试验研究[J]. 岩土工程学报, 2013, 35(5): 902-907.
LI B, ZHENG X, GAO Y F, et al.Model tests on pull-out capacity of suction caisson foundation in sand[J]. Chinese journal of geotechnical engineering, 2013, 35(5): 902-907.
[11] 戴国亮, 朱文波, 郭晶, 等. 软黏土中吸力式沉箱基础竖向抗拔承载特性试验研究[J]. 岩土力学, 2019, 40(S1): 119-126.
DAI G L, ZHU W B, GUO J, et al.Experimental study on vertical uplift bearing characteristics of suction caisson foundation in soft clay[J]. Rock and soil mechanics, 2019, 40(S1): 119-126.
[12] 练继建, 王芃文, 乐丛欢, 等. 吸力锚在粉质黏土中的上拔特性试验研究[J]. 太阳能学报, 2021, 42(5): 443-449.
LIAN J J, WANG P W, LE C H, et al.Experimental study on uplift characteristics of suction anchor in silty clay[J]. Acta energiae solaris sinica, 2021, 42(5): 443-449.
[13] 张浦阳, 魏宇墨, 校建东, 等. 复合筒型基础在粉土中的抗扭承载特性研究[J]. 太阳能学报, 2021, 42(9): 270-278.
ZHANG P Y, WEI Y M, XIAO J D, et al.Torsional bearing capacity of composite bucket foundation in silty sand[J]. Acta energiae solaris sinica, 2021, 42(9): 270-278.
[14] 王志云, 王栋, 栾茂田, 等. 复合加载条件下吸力式沉箱基础承载特性数值分析[J]. 海洋工程, 2007, 25(2): 52-56, 71.
WANG Z Y, WANG D, LUAN M T, et al.Numerical analysis of bearing capacity behavior of suction caisson foundations under combined loading[J]. The ocean engineering, 2007, 25(2): 52-56, 71.
[15] 丁红岩, 王旭月, 张浦阳, 等. 砂土中宽浅式复合筒型基础三维包络面研究[J]. 太阳能学报, 2018, 39(4): 1097-1104.
DING H Y, WANG X Y, ZHANG P Y, et al.Study of three-dimensional enveloping surface of wide-shallow composite bucket foundation in sandy soil[J]. Acta energiae solaris sinica, 2018, 39(4): 1097-1104.
[16] 武科, 栾茂田, 范庆来, 等. 倾斜荷载作用下桶形基础承载力特性研究[J]. 岩土力学, 2009, 30(4): 1095-1101.
WU K, LUAN M T, FAN Q L, et al.Studies of bearing capacity of bucket foundation against inclined loading[J]. Rock and soil mechanics, 2009, 30(4): 1095-1101.
[17] 范庆来, 吴宜鹏, 麻世林, 等. 密砂地基上海上风机吸力式桶形基础承载力研究[J]. 应用基础与工程科学学报, 2021, 29(6): 1550-1560.
FAN Q L, WU Y P, MA S L, et al.Bearing capacity of suction bucket foundations for offshore wind turbines in dense sand[J]. Journal of basic science and engineering, 2021, 29(6): 1550-1560.
[18] 刘红军, 张浩, 李洪江, 等. 软黏土中伞式吸力锚基础水平承载有限元分析[J]. 岩土力学, 2017, 38(11): 3325-3331.
LIU H J, ZHANG H, LI H J, et al.Finite element analysis of horizontal bearing capacity of umbrella suction anchor foundation in soft clay[J]. Rock and soil mechanics, 2017, 38(11): 3325-3331.
[19] 沈侃敏, 国振, 王立忠. 循环荷载下吸力锚基础周围孔压响应特性数值研究[J]. 地震工程学报, 2015, 37(1): 61-67, 81.
SHEN K M, GUO Z, WANG L Z.Numerical analysis of pore pressure response around a suction anchor under cyclic loading[J]. China earthquake engineering journal, 2015, 37(1): 61-67, 81.
[20] JEONG Y, KO K, KIM D, et al.Studies on cyclic behavior of tripod suction bucket foundation system supporting offshore wind turbine using centrifuge model test[J]. Wind energy, 2021, 24(5): 515-529.
[21] HOULSBY G T, KELLY R B, HUXTABLE J, et al.Field trials of suction caissons in clay for offshore wind turbine foundations[J]. Géotechnique, 2005, 55(4): 287-296.
[22] TRAN N X, HUNG L C, KIM S R.Evaluation of horizontal and moment bearing capacities of tripod bucket foundations in sand[J]. Ocean engineering, 2017, 140: 209-221.
[23] 刘树杰, 王忠涛, 栾茂田. 单向荷载作用下海上风机多桶基础承载特性数值分析[J]. 海洋工程, 2010, 28(1): 31-35.
LIU S J, WANG Z T, LUAN M T.Numerical analysis of bearing capacity behavior of multi-bucket suctional foundation for offshore wind turbine under monotonic loading[J]. The ocean engineering, 2010, 28(1): 31-35.
[24] BARARI A, GLITRUP K, CHRISTIANSEN L R, et al.Tripod suction caisson foundations for offshore wind energy and their monotonic and cyclic responses in silty sand: numerical predictions for centrifuge model tests[J]. Soil dynamics and earthquake engineering, 2021, 149: 106813.
[25] HE B, JIANG J, CHENG J, et al.The capacities of tripod bucket foundation under uniaxial and combined loading[J]. Ocean engineering, 2021, 220: 108400.
[26] 王鑫. 砂土中多筒基础受力特性及结构优化试验研究[D]. 南京: 东南大学, 2020.
WANG X.Experimental study on mechanical behavior and structural optimization of multi-bucket foundation in sandy soil[D]. Nanjing: Southeast University, 2020.
[27] CHENG X L, DU X L, LU D C, et al.A simple single bounding surface model for undrained cyclic behaviours of saturated clays and its numerical implementation[J]. Soil dynamics and earthquake engineering, 2020, 139: 106389.
[28] CHENG X L, WANG T J, ZHANG J X, et al.Finite element analysis of cyclic lateral responses for large diameter monopiles in clays under different loading patterns[J]. Computers and geotechnics, 2021, 134: 104104.
[29 EHRMANN A, PENNER N, GEBHARDT C, et al. Offshore support structures with suction buckets: parameter fitting of a simplified foundation model[C]//The 26th International Ocean and Polar Engineering Conference. Rhodes, Greece, 2016.
[30] CAO J C, PHILLIPS R, POPESCU R, et al.Numerical analysis of the behavior of suction caissons in clay[J]. International journal of offshore and polar engineering,2003, 13(2): 154-159.